The Wheeler Engineering Trigger Pull Gauge features measurements in ounces and ranges from 8oz to 8lbs in 2oz increments. For use, insert trigger pull gauge finger in front of the trigger and pull on the rear handle of the gauge. As more pressure is exerted against the trigger pull finger, the sliding indicator will move towards the heavier side of the scale; once the disconnector disengages the sear the sliding indicator will remain at the point at which the highest amount of pressure was exerted on the trigger finger.
The sliding indicator will then indicate the trigger pull weight. Features an easy-to-read sliding indicator and a rubberised tip.
* Minimum Measurements 8 Ounce
* Maximum Measurement 8 Pound